Bykski Gigabyte GTX 1060/1070/1080 Full Coverage GPU Water Block – Clear (N-GV1080G1-X)

Bykski Gigabyte GTX 1060/1070/1080 Full Coverage GPU Water Block. This block is constructed of high purity electroplated copper to prevent oxidation. A high flow design allows multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.

Only 1 left in stock

Bykski Gigabyte GTX 1060/1070/1080 Full Coverage GPU Water Block – Clear (N-GV1080G1-X)

R1,099

R1,099

Reviews

The Bykski N-GV1080G1-X Full Coverage GPU Water Block is a work of art! This full coverage block, directly cools the video cards core (GPU), graphics memory (RAM) as well as voltage regulator modules (VRM). By directly cooling these components you can achieve great temperatures! Along with these temperatures comes the ability to reach higher overclocks or extend the overall lifespan of your card by running at below factory temps.

This block is constructed of high purity electroplated copper to prevent oxidation. A high flow design allows multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.

FEATURES
  • Finest Craftmanship
  • Designed to Fit Standard G1/4″ Thread Fittings
  • SLI/Crossfire Compliant
SPECIFICATIONS
  • Model: N-GV1080G1-X
  • Brand: Bykski
  • Material: Electroplated High Purity Copper / Clear Acrylic
COMPATIBILITY
  • Loop: Non-Aluminum
  • (Including but not limited to the following models)
  • Gigabyte GTX 1080 D5X 8G
  • Gigabyte GTX 1080 WINDFORCE OC 8G
  • Gigabyte GV-N1080WF2
  • Gigabyte GV-N1080 G1 GAMING-8GD
  • Gigabyte GTX 1070 G1 Gaming 8G (Rev1.0 only)
  • Gigabyte GV-N1070 WF2
  • Gigabyte GV-N1060G1 GAMING-6GD
  • Gigabyte GTX 1060 D5 6G
  • Fittings: G1/4″ Thread
  • Stock Backplates: Due to mounting variances between cards, stock backplates not guaranteed to fit.
PARTS INCLUDED
  • 1x Full Coverage GPU Water Block
  • 2x Stop Fitting
  • 1x Mounting Hardware
  • 1x RGB LED

 

(Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage.

Note!
Bykski LED modules always operate with 5 Volt. For hassle free running you always need a 3-pin 5 Volt ADD-Header or compatible controller.

Attention!
If you connect the 5 Volt LED model with a 12 Volt power, the 5 Volt module will be destroyed by the overload!

 

Some manufacturers stick a protection foil on the backside of their CPU/ GPU coolers. This foil must be removed before mounting. Bykski does not assume any liability for improper use or faulty assembly

 

 

Weight 1.8 kg
Dimensions 30 × 16 × 6 cm

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
C.K.
Simply brilliant

Very easy to mount, and very efficient, my highest temperatures are now what my idle temps used to be with the stock cooler, I absolutely am a fan of bykski products now!