Bykski MSI RTX 2070 / 2080 Ventus V2 Full Coverage GPU Water Block and Backplate (N-MS2080VENTUS-X)

Bykski MSI RTX 2070 / 2080 Ventus V2 Full Coverage GPU Water Block. This block is constructed of high purity electroplated copper to prevent oxidation. A high flow design allows multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.

Out of stock

R500

Reviews

The Bykski MSI RTX 2070 / 2080 Ventus V2 Full Coverage GPU Water Block is a work of art! This full coverage block, directly cools the video cards core (GPU), graphics memory (RAM) as well as voltage regulator modules (VRM). By directly cooling these components you can achieve great temperatures! Along with these temperatures comes the ability to reach higher overclocks or extend the overall lifespan of your card by running at below factory temps.

This block is constructed of high purity electroplated copper to prevent oxidation. A high flow design allows multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.

FEATURES
  • Finest Craftsmanship
  • Designed to Fit Standard G1/4″ Thread Fittings
  • SLI/Crossfire Compliant
SPECIFICATIONS
  • Model: N-MS2080VENTUS-X
  • Brand: Bykski
  • Material: Electroplated High Purity Copper / Clear Acrylic
COMPATIBILITY
  • MSI RTX 2080 8G Ventus V2
  • MSI RTX 2070 Super 8G Ventus (V372 circuit board)
  • Fittings: G1/4″ Thread
  • Stock Backplates: Due to mounting variances between cards, stock backplates not guaranteed to fit.
PARTS INCLUDED
  • 1x Full Coverage GPU Water Block
  • 2x Stop Fitting
  • 1x Mounting Hardware
  • 1x 5v Addressable RGB (RBW)

(Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage.

Note!
Bykski LED modules always operate with 5 Volt. For hassle free running you always need a 3-pin 5 Volt ADD-Header or compatible controller.

Attention!
If you connect the 5 Volt LED model with a 12 Volt power, the 5 Volt module will be destroyed by the overload!

 

Some manufacturers stick a protection foil on the backside of their CPU/ GPU coolers. This foil must be removed before mounting. Bykski does not assume any liability for improper use or faulty assembly

 

 

 

 

Weight 1.8 kg
Dimensions 30 × 18 × 6 cm
Bykski MSI RTX 2070 / 2080 Ventus V2 Full Coverage GPU Water Block and Backplate (N-MS2080VENTUS-X)

Out of stock